Method for extracting copper from old rotors

The method for extracting copper from old rotors is a common method for recycling scrap metals. It can extract the copper wire from the discarded motor rotor and recycle the copper wire. The operation steps are as follows:

Step 1: Prepare tools and sites

First, arrange a spacious and ventilated site to prevent safety problems during work. At the same time, relevant tools such as electric saws, electric drills, screwdrivers, hammers, etc. need to be prepared.

Step 2: Disassemble the motor rotor

Place the discarded motor rotor on the work platform and use an electric saw or other tools to cut off both ends of the motor rotor. Next, use a screwdriver to disassemble the stator in the rotor, and disassemble the copper wire in the stator and the copper wire attached to the inner shell separately.

Step 3: Screening copper wire

Preliminary screening of the disassembled copper wire and breaking the copper wire. At the same time, retain the smooth part of the copper wire for easy recycling.

Step 4: Clean the stator

Next, clean the disassembled stator and use a vacuum cleaner or other tools to clean the small metal fragments and other impurities remaining in the inner shell of the stator.

Step 5: Recycling

Finally, the screened copper wires are stored in a centralized manner for recycling. Usually, we should pay attention to collecting more scrap electrical motor rotors for recycling and reuse.

In short, the method of extracting copper from old rotors is a simple and practical method of recycling scrap metals, which can effectively utilize resources and reduce damage to the environment and resources. At the same time, we should also raise environmental awareness, classify waste products, and jointly protect the environment.